dimensions in inches and (millimeters) - 108 - to-220ab features plastic material used carries underwriters laboratory classifications 94v-0 metal silicon junction, majority carrier conduction low power loss, high efficiency high current capability, low forward voltage drop high surge capability for use in low volta g e, hi g h frequenc y inverters, free wheeling, and polarity protection applications guardring for overvoltage protection high temperature soldering guaranteed: 260 o c/10 seconds,0.25?(6.35mm)from case mechanical data cases: jedec to-220ab molded plastic body polarity: as marked mounting position: any mounting torque: 5 in. - lbs. max weight: 0.08 ounce, 2.24 grams maximum ratings and electrical characteristics rating at 25 o c ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, der ate current by 20% type number symbol mbr 1035 ct mbr 1045 ct mbr 1050 ct mbr 1060 ct mbr 1090 ct mbr 10100 ct mbr 10150 ct mbr 10200 ct units maximum recurrent peak reverse voltage v rrm 35 45 50 60 90 100 150 200 v maximum rms voltage v rms 24 31 35 42 63 70 105 140 v maximum dc blocking voltage v dc 35 45 50 60 90 100 150 200 v maximum average forward rectified current at tc=125 o c i (av) 10 a peak repetitive forw ard current (rated v r , square wave, 20khz) at tc=125 o c i frm 32 a peak forward surge curr ent, 8.3 ms single half sine-wave superimposed on rated load (jedec method ) i fsm 120 a peak repetitive reverse surge current (note 1) i rrm 1.0 0.5 a maximum instantaneous forward voltage at: (note 2) i f =5a, t c =25 o c i f =5a, t c =125 o c i f =10a, t c =25 o c i f =10a, t c =125 o c v f 0.70 0.57 0.80 0.67 0.80 0.65 0.90 0.75 0.85 0.75 0.95 0.85 0.88 0.78 0.98 0.88 v 0.1 maximum instantaneous reverse current @ tc =25 o c at rated dc blocking voltage @ tc=125 o c (note 2) i r 15 10 2.0 ma ma voltage rate of change (rated v r ) dv/dt 10,000 v/us maximum typical thermal resistance (note 3) r jc 1.5 o c/w operating junction temperature range t j -65 to +150 o c storage temperature range t stg -65 to +175 o c notes: 1. 2.0us pulse width, f=1.0 khz 2. pulse test: 300us pulse width, 1% duty cycle 3. thermal resistance from junction to case per leg, mount on heatsink size of 2 in x 3 in x 0.25in al-plate. mbr1035ct-mbr10200ct 10.0amp. schottky barrier rectifiers http://www.luguang.cn mail:lge@luguang.cn
fig.2- maximum non-repetitive forward surge current peak forward surge current. (a) 1 10 100 180 150 120 90 60 30 0 number of cycles at 60hz fig.4- typical reverse characteristics instantaneous reverse current. (ma) 0 20 40 60 80 100 120 140 percent of rated peak reverse voltage. (%) 0.001 0.1 0.01 1 10 50 fig.6- typical transient thermal characteristics per leg transient thermal impedance. ( c/w) o 1 0.01 0.1 10 100 0.1 10.0 1 100 t, pulse duration. (sec) fig.5- typical junction capacitance junction capacitance.(pf) 0.1 1.0 10 100 100 1,000 5,000 reverse voltage. (v) tj=25 c f=1.0mhz vsig=50mvp-p 0 fig.1- forward current derating curve average forward current. (a) 0 50 100 150 6 5 4 3 2 1 0 case temperature. ( c) o resistive or inductive load ratings and characteristic curves (mbr1035ct thru mbr10200ct) 500 tj=tj max. 8.3ms single half sine-wave jedec method tj=75 c 0 tj=125 c 0 tj=25 c 0 fig.3- typical forward characteristics instantaneous forward current. (a) 0.6 0.8 1.0 1.2 1.4 0.1 10 forward voltage. (v) 0.4 0.2 0 5 tj=25 c pulse width=300 s 1% duty cycle o 1 mbr1050ct-1060ct mbr1035ct-1045ct 100 50 200 mbr10150ct-10200ct mbr1090ct-10100ct mbr1035ct-1045ct mbr1090ct-10200ct mbr1050ct-1060ct mbr1035ct-mbr10200ct 10.0amp. schottky barrier rectifiers http://www.luguang.cn mail:lge@luguang.cn
|
